How do you hook up a power supply to a car radio

how do you hook up a power supply to a car radio

How do I connect a car radio to a power supply?

To connect a car radio to a power supply you’ll need to do the following: Ground: Connect the radio’s ground wire (black wire) to the (-) power supply output Main power: Connect the radio’s +12V battery wire (usually the yellow wire) to the (+) power supply output

Can I use a computer power supply for a car stereo?

Using an ATX (desktop computer) power supply for a car stereo isn’t hard – in fact, you only need a few steps: Power connections: Cut a +12V wire (yellow) and a ground (black) wire from the main connector. Strip the insulation to leave about 3/8″ to 1/2″ bare wire.

Where does the power wire come from on a car stereo?

The power wire coming from the stereo is usually red, and likely will connect to a red wire from the car. The ground wire for the stereo will be black, as will its corresponding wire from the car. If there is no ground wire, you can secure the ground cable to bare metal in the body of the car to serve as a ground.

Can you plug a car AMP into a car stereo?

Car stereos aren’t designed to be bridged like a car amp. Using an ATX (desktop computer) power supply for a car stereo isn’t hard – in fact, you only need a few steps: Power connections: Cut a +12V wire (yellow) and a ground (black) wire from the main connector. Strip the insulation to leave about 3/8″ to 1/2″ bare wire.

How do you hook up a car radio to power?

1 Ground: Connect the radio’s ground wire (black wire) to the (-) power supply output 2 Main power: Connect the radio’s +12V battery wire (usually the yellow wire) to the (+) power supply output 3 Turning the radio on: You can do this by hardwiring the radio’s accessory wire (usually red) to the +12V battery wire or you can use a switch in between.

How to wire a computer power supply to a car stereo?

How to wire a computer power supply to a car stereo Using an ATX (desktop computer) power supply for a car stereo isn’t hard – in fact, you only need a few steps: Power connections: Cut a +12V wire (yellow) and a ground (black) wire from the main connector. Strip the insulation to leave about 3/8″ to 1/2″ bare wire.

Can you plug a car radio into a house outlet?

The quick answer is yes, with the right power supply, you can hook up a car stereo to a house outlet with 120V or even 220V power. You cannot, however, directly connect a car stereo to an outlet. However, you’ll need to know just a few things to make sure you don’t have any headaches or potentially destroy your car stereo. Is a car radio AC or DC?

Can you plug a car AMP into a car stereo?

Car stereos aren’t designed to be bridged like a car amp. Using an ATX (desktop computer) power supply for a car stereo isn’t hard – in fact, you only need a few steps: Power connections: Cut a +12V wire (yellow) and a ground (black) wire from the main connector. Strip the insulation to leave about 3/8″ to 1/2″ bare wire.

Can you connect a car AMP to a home stereo?

You can also connect a car amp to any home stereo, your smartphone, and more as an audio source. There is a catch, though. Because car amps use a different power source than home stereos the biggest problem is getting them the power they need.

How to connect car stereo with outlet plug?

To connect the car stereo with the outlet plug two basic things are necessary the first thing is removing the stereo from the car and the second thing is to connect it with the outlet plug. After removing the stereo from the car connect it with a 120 volt supply unit and then connect it with a plug.

Can you connect a subwoofer to a car AMP RCA?

Some only have subwoofer RCA output jacks which are bass-only outputs. Full-range RCA output jacks can be connected directly to the car amp’s RCA inputs. In all cases, you’ll also need to wire the amp with power and a remote-on wire so it can turn on.

How do you hook up a 12 volt amp to a car?

Connect your remote wire to a 12v switched source that only powers when the car is running and run that down with your other wires to your amp and connect that to the remote wire input on your amp. Run your 12v batter wire from your battery to your amplifier.

Related posts: