Ecobee4 humidifier hookup

ecobee4 humidifier hookup

How to wire a humidifier to an ecobee?

Hence, it is recommendable for safety reasons that you have both the humidifier and the ecobee off during the wiring process. After powering off the humidifier, locate the wires that were previously connecting the fan and water valve. The RC, G, Y1, and W1 wires should be wired according to the version of the ecobee.

Does ecobee3 smart thermostat work with humidifiers?

Specifically, the ecobee3 smart thermostat is compatible with most HVAC devices, hence can work with most humidifiers. Further, to have the ecobee faultlessly working with the humidifier, you need first to wire them and then configure the humidifier into the ecobee just like any other equipment.

How do I install my ecobee4 myself?

Install your ecobee4 with confidence With everything you need in the box, installing the ecobee4 yourself is simple. Keep in mind that the process will vary depending on your setup. Check that all wires are properly inserted into the terminal blocks at the thermostat. Make sure your HVAC cover panel is closed.

Do I need the Pek with my ecobee device?

You wont need the PEK included in the box. If you have an extra wire that isn’t connected to any terminal on your thermostat, you can use it as a C-wire. Not the DIY type? Hire a professional installer to get your ecobee device up and running quickly.

Can I use a manual humidifier with an ecobee?

You would need to put a manual humidistat inline with one wire. If you want to use your Ecobee to control the humidity it needs a one wire connection. You could use the Y wire if you switch it over at the beginning and end of the season.

How do I hook up a humidifier to a thermostat?

You will need two wires between the humidifier and the thermostat. You need to have the thermostat installed and programmed for two wire control (ACC+ and ACC-) before powering up the humidifier transformer. If you only have one spare wire then youll need to use a relay.

What wire do I need to power the humidifier?

You need to have the thermostat installed and programmed for two wire control (ACC+ and ACC-) before powering up the humidifier transformer. If you only have one spare wire then youll need to use a relay.

Is there a wiring diagram for the Ecobee4 thermostat?

The following wiring diagrams are for the ecobee4 thermostat and common HVAC equipment configurations. HUMIDIFIER/DEHUMIDIFIER 1-WIRE SETUP. My diagram shows using Rc. although either should work.

You wont need the PEK included in the box. If you have an extra wire that isn’t connected to any terminal on your thermostat, you can use it as a C-wire. Not the DIY type? Hire a professional installer to get your ecobee device up and running quickly.

Can I connect ecobee4 to a 24vac system?

WARNING ecobee4 is designed for 24VAC with a 2A maximum current. Do not connect it to line (high) voltage or millivolt systems. YES NO RCRHRCRH YES NO CHECKPOINT: C WIRE Do you have a C wire connected to your old thermostat? Continue to Guide 1 Continue to Guide 2 GUIDE 1 Install your ecobee with a C wire

What is an ecobee Pek and how does it work?

The ecobee PEK provides the constant electrical power needed to run the display and connect to WiFi in systems without a C-Wire. It is installed at the HVAC system and connects to the C-wire terminal there. But, since the wires running to your thermostat don’t have a C-wire, it instead uses the R-Wire.

Do I need A C-wire to power my ecobee?

If you have a C-wire, it will power your ecobee. You wont need the PEK included in the box. If you have an extra wire that isn’t connected to any terminal on your thermostat, you can use it as a C-wire.

Can I use an ecobee smart thermostat on older HVAC systems?

For older HVAC systems without a constant power supply (C-Wire), you can use an ecobee Power Extender Kit (PEK). This kit allows you to use an ecobee smart thermostat on older systems that do not have much digital technology. The PEK is easy to install and doesn’t require you to run any new wiring.

What is the ecobee app and do I need It?

The ecobee app is a convenient way for you to access your ecobee devices from anywhere at any time. To take advantage of this amazing feature, you will need to download the ecobee app to your mobile device and register your thermostat to an ecobee account. How do I download the ecobee app?

Related posts: