How do you hook up a 36 volt trolling motor

how do you hook up a 36 volt trolling motor

How to hook up a trolling motor to a battery?

All you need to do is take your battery and hook up the black wire from your trolling motor to the negative terminal on your battery. Once you’ve done this, do the same for the red wire and hook it up to the positive terminal on your battery.

How to choose the best trolling motor for fishing?

Determine if you will only fish in freshwater, saltwater, or both, and pick your trolling motor accordingly. Wire extensions: Measure the distance from your trolling motor to your battery setup. Most trolling motors only come with power leads that are 3-5 feet in length. You may need wire extensions to reach your battery setup.

What is the best 36-volt trolling motor connections kit?

That is why we suggest taking some of the risks out of the equation by using the Connect-Ease RCE36VBCHK Easy 36-Volt Trolling Motor Connections Kit. This 36-volt trolling motor kit will make installation one-hundred times easier and safer.

How many cables do I need for my trolling motor?

Three cables are for your trolling motor batteries, while the fourth cable is for you’re A/C power. The A/C cable should be plugged in at all times while the boat is not in use.

How to hook up 3 12-volt batteries to a trolling motor?

Line up your three 12-volt batteries. Take the black lead from your trolling motor and hook it up to the negative terminal of the first battery. Take the red lead from your trolling motor and hook it up to the positive terminal of the third battery. Once the red lead is hooked up, you should put a 40-amp breaker on the terminal too.

How do you hook up 3 batteries to a 40 Amp motor?

Include a 40-amp circuit breaker on this positive connection. Connect a jumper wire between the positive terminal of the first battery and the negative terminal of the second battery. Connect 36-volt motors to three 12-volt batteries that are connected in series.

How does a trolling motor work?

The trolling motor is a combination of an electric motor, the controls for the motor, and the propeller. The motor drives the propeller, which moves the boat through the water and can be either at the stern or the bow of the boat.

What kind of battery does a Minn Kota trolling motor use?

A Minn Kota trolling motor will operate with any lead acid, deep cycle marine 12-volt battery/batteries. For best results, use a deep cycle, marine battery with at least a 110-ampere hour rating. Never connect the (+) and the (-) terminals of the same battery together.

What wire gauge should I use for a trolling motor?

Most trolling motor manuals call for a maximum voltage drop of 5% so to fallow ABYC standards always use 3% tables to calculate for electric trolling motors. Manufacturers of trolling motors tend to come up with a guide for wire gauge to use, but they do this for the voltage rating of the motor, i.e., 12V, 24V and 36V would have different catalogs.

What voltage do trolling motors come in?

Trolling motors come in three voltage ratings: 12v, 24v and 36v. Motors with higher voltages have more thrust. In practical terms, a trolling motor with adequate thrust for your boat and common conditions will achieve the following: Allow your boat to get on plane easily

What if I dont want to install a trolling motor plug?

If you dont want to permanently install a trolling motor plug and receptacle, there are a few other options. If you want to attach a quick-disconnect wire close to the trolling motor or anywhere in-line with the trolling motor wire, we recommend this quick-connect plug.

How do you wire a trolling motor to a receptacle?

Place the receptacle into the mounting hole and mount the receptacle using the 7/64 screws in the small 7/64 holes. Once the battery leads are wired to the battery (ies), attach the trolling motor plug to the receptacle and the system is ready to go.

Related posts: