How do you hook up a 4 way switch

how do you hook up a 4 way switch

How do you wire a 4 way switch?

4 Way Switch Wiring with Four Switches Here two 4 way and two 3 way switches are used to control lights from four different locations. The two 4-ways are located between the two 3-ways and the traveler wires run from SW1 to T1 on the first 4-way. T2 from that switch is wired to T1 on the second 4way and T2 connects to the travelers on SW2.

When do you need a 4-way switch?

When Do You Need a 4-Way Switch? If you understand the logic behind the 3-way circuit, the 4-way will not seem that difficult. The 4-way is used when you want to control the light or lights from two or more locations. 4-Way Switch – NOT To Be Confused With a 2-Pole Switch!

What is a 3-way switch and how is it wired?

A 3-way switch is used on each end with one or more 4-way switches in between the two 3-way switches. They do not have an on/off position like single pole switches. It is important to understand how these switches are wired before attempting to troubleshoot or replace. Below is a conventional wiring diagram for a 4-way switch configuration.

Can you replace a single pole switch with a 4-way switch?

Most DIYers can easily tackle replacing a standard single-pole switch. However, things get a little more complex when you need to add a 4-way circuit. The 4-way circuit is used when you want to control the light or lights from three or more locations. This article and detailed wiring diagram outlines the steps to wiring a 4-way switch.

What wires do you connect to a 4 way switch?

Connecting the terminals of a 4-way switch Neutral (or white) wires of three-way switches should be connected together and also the ground copper wire (that is attached to the green terminal on the 4-way switch). Now you will have only red and black (or hot) wires left.

How do you read a 4-way switch?

Study the 4-way switch and the manufacturers directions. 1 A 4-way switch has 4 terminals or poles. 2 Two terminal/poles are labeled in, and two are labeled out. 3 Pairs of wires, called travelers, will connect to each side. 4 When the switch is operated, current will either travel straight through or crisscross. ... More items...

How do you wire a 3 way switch to a light?

Connect them all and be comfortable shutting your lights on and off from any part of the kitchen (for example). Neutral (or white) wires of three-way switches should be connected together and also the ground copper wire (that is attached to the green terminal on the 4-way switch).

How do you wire a 4 way dimmer switch?

4 Way Dimmer Switch Wiring Diagram. This is the wiring for a dimmer in a 4 way circuit. Three-wire cable runs between all the switches and 2-wire cable runs to the light. To make this circuit work, a 3 way dimmer can be used in place of one, or both of the standard 3 way switches.

Related posts: