Hook up aer

hook up aer

How do I connect the hue+ controller to the AER RGB?

Then, put the controller cable to the Aer RGB IN port and connect it with HUE+. Get the 10-50 cm fan to fan cable to connect IN and OUT ports to connect the fans.

How to connect Aer RGB fan controller to motherboard?

All you have to do now is connect your fan controller or the motherboard to the Aer RGB’s four pin power cable, and you can choose to add the low noise adapter but, you have to add it before connecting to the motherboard. That is in case you want to lower the sound.

Is there a flexible endoscope that Cantel AER can reprocess?

In fact, there is not a flexible endoscope a Cantel AER cannot reprocess. Examples include: gastroscopes, colonscopes, EUS scopes, cystoscopes, bronchoscopes, twin channel, dilators and TEE probes. Hookup designs are validated for proper flow to provide high-level disinfection of semi-critical endoscopes and accessories.

What is the advantage hookup guide?

The interactive Hookup Guide provides quick access to determining the correct hookup-scope combination for your AER, region, disinfectant and detergent. Service hookup assemblies are now available for some Advantage Hookup models. The hookup design varies depending on the connector model used.

How to connect hue+ fans to the AER RGB?

Then, put the controller cable to the Aer RGB IN port and connect it with HUE+. Get the 10-50 cm fan to fan cable to connect IN and OUT ports to connect the fans. You will need to use the extender cable in order to extend the length of your two fan to fan cables.

How to install NZXT Aer RGB fans on your computer?

There are few simple steps that you need to take and understand if you want to correctly install NZXT AER RGB fans onto your computer. First, you need to connect HUE+ and Molex power cable. Then, you need to connect your USB cable with HUE+ and the motherboard. Then, put the controller cable to the Aer RGB IN port and connect it with HUE+.

How do I install hue+?

Installation Steps 1 First, you need to connect HUE+ and Molex power cable. 2 Then, you need to connect your USB cable with HUE+ and the motherboard. 3 Then, put the controller cable to the Aer RGB IN port and connect it with HUE+. 4 Get the 10-50 cm fan to fan cable to connect IN and OUT ports to connect the fans. ... More items...

How to connect hue+ to the motherboard?

Then, you need to connect your USB cable with HUE+ and the motherboard. Then, put the controller cable to the Aer RGB IN port and connect it with HUE+. Get the 10-50 cm fan to fan cable to connect IN and OUT ports to connect the fans.

What is an advantages hookup?

Advantage Hookups — designed for individual channel monitoring, Advantage hookups have a connector block with eight separate ports. Separate Connector Assemblies provide the connection from the block ports to the endoscope channels. These hookup designs are designated with a HAN suffix.

How many ports are on an advantage hookup?

RELATED PRODUCTS Designed for individual channel monitoring, Advantage hookups have a connector block with eight separate ports. Separate Connector Assemblies provide the connection from the block ports to the endoscope channels. These hookup designs are designated with a HAN suffix.

What is an ADAD advantage hookup?

Advantage Hookups Products Description DESCRIPTION DOCUMENTS IN-SERVICE MATERIALS RELATED PRODUCTS Designed for individual channel monitoring, Advantage hookups have a connector block with eight separate ports. Separate Connector Assemblies provide the connection from the block ports to the endoscope channels.

What is the hookup guide?

The interactive Hookup Guide provides quick access to determining the correct hookup-scope combination for your AER, region, disinfectant and detergent. Service hookup assemblies are now available for some Advantage Hookup models. The hookup design varies depending on the connector model used. Check out the interactive Hookup Guide: Click here

Related posts: